Electrical Safety Analyzers
LKG 601 - Basic Electrical Safety Analyzer
|
The
LKG 601, Electrical Safety Analyzer is an extremely easy to use
portable Electrical Safety Analyzer designed specifically for testing
non-ECG equipment. Ground resistance, leakage current, and instrument
current test measurements are displayed on its large LCD.
With
its unique operating features, the LKG 601 out performs all other basic
analyzers. To insure accuracy, each test has calibrated test points.
The accessible instrument fuse solves the maintenance problems of
built-in fuses. The selectable test load provides testing flexibility.
The LKG 601 meets both AMMI and IEC 601 Standards.
For the routine electrical safety testing of all your electrical equipment, the LKG 601 is simply the best selection.
The LKG 601 comes with soft carrying case and red resistance test cable.
|
|
|
 |
 |
 |
Easy to use |
|
Fast, Accurate amp; Portable |
|
Large LCD |
|
Accessible Line Fuse |
|
Selectable Test Loads |
|
Calibrated Test Points |
|
15 and 20 Amp capability |
|
Complies with AAMI or IEC 610-1 Test Load Loads |
|
 |
|
Ground Resistance |
|
Case Leakage Current |
|
Earth Leakage Current |
|
Instrument Current |
|
|
|
Display
3 1/2 Digit LCD Display
Leakage Current
0-1999 micro amps. All Current measurements are made through the AAMI/ANSI ESI - 1985 or IEC 601 - 1 test loads.
The meter readings correspond to the true RMS value of the current
Accuracy:
DC to 1 kHz: +/- 1% of reading, +/- 1 LSD
1 kHz to 100 kHz: +/- 2.5% of reading +/- 1 LSD
100 kHz to 1 mHz: +/- 5% of reading +/- LSD
Resistance:
0 to 1999 milliohms.
Accuracy is +/- 1% of reading +/- 1 LSD
Device Current :
0 to 19.99 amps. Accuracy is +/- 2% of FS +/- 1LSD
Measures Ground Resistance, Internal and External Leakage Current, and Instrument Current.
Test Receptacle
Hospital Grade 110V AC - 15 amp or 220V AC 10 amp.
The
rocker polarity switch selects NORMAL, OFF and REVERSE Polarity to the
test receptacle, and a momentary Neutral switch will open the neutral
line to the test receptacle
Power Requirements
110V AC 50 - 60 Hz, 15 amps or 220V AC, 10 amps maximum rated for the test outlet and 0.1 amp rated for the unit.
Ambient Temperature
Operating Range: 59 to 95 degrees F (15 to 40 degrees C)
Storage Temperature: 0 to 122 degree F (-20 to 60 degree C)
Relative Humidity: 90% (max) at temperatures
|
Physical Dimensions
Size: 5.5 x 3.25 x 2.5inches (13.75 x 8.13 x 6.25 cms)
Weight: 1 lbs (0.45 kg)
|
|
|
 |
|
|
